1. Before starting work, the operator should check and sort out the press and work site: check whether the precision stamping parts and precision terminal die are clean; Check the fastening of the die and the fixing on the press; Check the material thickness and surface cleanliness; Check the lubrication of the press, prepare the waste box, and put the precision stamping parts and precision terminal blank at the designated position for easy access.

        2. Always observe safety regulations when working. For example, the specified safety systems shall always be implemented during stamping; Wear work clothes and work caps when working, work carefully, always adhere to the post, and concentrate on the idea to prevent personal accidents.

        3. Operate in strict accordance with the contents specified in the process specification for precision stamping parts and precision terminals, and concentrate on the work. Precision stamping parts and the first piece of precision terminal must be inspected and qualified before production. During the stamping process, self-inspection and special inspection should be carried out at any time, and the host machine should not put double materials, and the waste should be cleaned in time. In case of failure, stop the machine immediately and report to relevant departments in time. The machine can be started for production only after it is restored to normal.

        4. After work, first turn off the power switch. Clean the press, precision stamping parts and precision terminal die, apply lubricating oil on the working part of the die, and sort out the parts, scrap and scrap.